The laboratory jacketed glass reactor can be injected with a constant temperature (high or low temperature) hot-melt medium or cooling medium through the interlayer to heat or cool the materials in the reactor at a constant temperature. It is an ideal equipment for modern chemical small sample, medium sample experiment, biopharmaceutical and new material synthesis.
Next, Jordan will take you to learn more about the characteristics of ZZKD's hot-selling laboratory jacketed glass reactor, so that everyone will choose it without hesitation.
The laboratory jacketed glass reactor can be used for high-temperature reactions (configured with corresponding circulating oil baths, the maximum temperature can reach 300°C), and can also be used for low-temperature reactions (configured with corresponding low-temperature refrigerant circulation systems, the lowest temperature can reach -80°C ). The materials are reacted in the laboratory jacketed glass reactor, and the evaporation and reflux of the reaction solution can be controlled. After the reaction is completed, the material can be released from the discharge port at the bottom of the kettle. Its unique design makes the test safer and more convenient.
Laboratory jacketed glass reactor is easy to install
The laboratory jacketed glass reactor produced by ZZKD has been designed in consideration of how to install it easily and quickly. Let's take a look at the quick installation method of the laboratory jacketed glass reactor with me.
1. First, open the package and check whether the accessories of the laminated glass reactor are complete according to the list.
2. Assemble the frame, assemble the stainless steel pipe and fixing parts as shown in the attached picture.
3. Install the electrical box and vacuum gauge, install the electrical box on the top of the right rear pole, tighten the screws, and plug in the seven-pin plug. The vacuum gauge is installed at the left rear end, just tighten the screws.
4. Install the main body of the reaction kettle. According to the height of use, fix the round bracket of the kettle on the slider of the vertical pole. Then tighten the fixing screws.
5. Install the stirring rod and adjust the position of the motor. First fix the stirring rod on the gear ring chuck of the motor spindle, pass the stirring rod through the middle rotating bearing, tighten the special connector, and then adjust the position of the motor.
6. Fix the position, press the universal wheel fixing device, and stir. If the stirring is stable, it means that the debugging is good.
Note: When installing the glass instrument, it must be cleaned. Apply Vaseline to each interface to prevent the glass from locking up, and then apply vacuum grease to prevent air leakage.
After reading the above content, do you feel that the installation method of the laboratory jacketed glass reactor produced by ZZKD is quick and easy. Of course, this is not the main reason for its hot sales. The main reason is that the characteristics of the laboratory jacketed glass reactor attract people to buy it.
Laboratory Jacketed Glass Reactor Features
Let's take a look at the main features of the laboratory jacketed glass reactor.
1. The laboratory jacketed glass reactor adopts frequency conversion speed regulation and AC induction motor. Constant speed, no brushes, no sparks, safe and stable, can work continuously, and work efficiency is greatly improved.
2. The glass instruments on the laboratory jacketed glass reactor are all made of GG17 high borosilicate glass. This kind of glass has good chemical and physical properties, and the quality is guaranteed.
3. The glass interlayer interface of the laboratory jacketed glass reactor is connected to hot oil or freezing liquid, which can be used for heating reaction or low temperature reaction.
4. The laboratory jacketed glass reactor reacts at room temperature, and it can be connected with tap water, which is economical and affordable.
5. The lower discharge port uses a flange port and a PTFE valve, which can be disassembled to facilitate material discharge, which is more convenient.
6. The lid of the laboratory jacketed glass reaction kettle is designed with a large mouth, which is easy to clean, and the socket can be assembled with reflux and distillation synthesis devices.
Are you excited after reading the above content? Don't worry, the convenient and quick maintenance of the laboratory jacketed glass reactor is also a feature that attracts people to buy it.
Laboratory jacketed glass reactor is easy to maintain
1. Wipe each interface with a soft cloth (you can replace it with a napkin), and then apply a little vacuum grease. (The vacuum grease should be covered after use to prevent lime sand from entering.)
2. Regularly loosen and connect the various interfaces to avoid long-term tight locking that will cause the connectors to be seized.
3. After each use, use a soft cloth to wipe off all kinds of oil stains, stains, and solvent residues left on the surface of the machine, and keep it clean.
4. Unscrew each PTFE switch after stopping the machine, and the PTFE piston will be deformed if it is still in the working state for a long time.
5. Clean the sealing ring regularly, remove the sealing ring, wipe it clean with a soft cloth, and then apply a little vacuum grease to keep the shaft and the sealing ring lubricated.
The above reasons are the reasons why everyone chooses the jacketed glass reactor of ZZKD laboratory. Are you very excited after reading it? Of course, perfect products are also indispensable for perfect after-sales service support.
A good after-sales service
ZZKD Machinery Instrument Equipment Co., Ltd. is a comprehensive manufacturer specializing in R&D, production, sales, laboratories, biochemical and pharmaceutical equipment, especially transevaporators, glass reactors, vacuum pumps, etc. 13 years of production and export experience and a series of ISO9001 and CE certificates, with warehouses in the United States, Spain and Thailand.
1. 24-hour online customer service, providing reasonable solutions
2. Factory direct sales, fast arrival, 1-2 days from warehouse
3. Video communication to guide problems that arise during use.
4. Professional after-sales department, after-sales return visit, maintenance service.
If you want to know about our products, or want to buy our equipment, please feel free to contact us, ZZKD will provide you with the most favorable price of laboratory jacketed glass reactor.
